Molding Data Sheets

Liquid Silicone Compounds for Injection Molded Gaskets and Sheets
Material	Raw Compound	Duro- meter	Base / Cure	Features / Uses
SE2010	Wacker 3003/10TR	10	LSR / Platinum	- Seals with low force - Suitable for IP67 - Low oil formula - Enhanced mechanicals
SE2020	Wacker 3003/20TR	20	LSR / Platinum	- Seals with low force - Suitable for IP67 - Enhanced mechanicals
SE2030	Wacker 3003/30	30	LSR / Platinum	- High Tensile and Elongation - Suitable for IP67 - UL Flame Rated, UL 94HB
SE2040	Wacker 3003/40	40	LSR / Platinum	- High Tensile and Elongation - Suitable for IP67 - UL Flame Rated, UL 94HB
SE2050	Momentive LIM 6050	50	LSR / Platinum	- Meets FDA 21CFR177 2600 - Suitable for IP67 - High tear strength
SE2060	Wacker 3003/60	60	LSR / Platinum	- Good Mechanical Properties - Suitable for IP67 - UL Flame Rated, UL 94HB
SE2070	Wacker 3003/80	70	LSR / Platinum	- Good Mechanical Properties - Suitable for IP67 - UL Flame Rated, UL 94HB
Compression Deflection Curves for LSR Molding Compounds
		Request a Free Liquid Silicone Rubber Touch Brochure Request a free "touch" brochure with small samples of cured LSR materials to touch and feel.

Fluorosilicone Molding Compounds for Compression Molded Gaskets and Sheets
Material	Duro- meter	Min Tensile, psi	Base / Cure	Features / Uses
FK-40	40	800	Gum / Peroxide	- Mil-R-25988 B Type 2, Class 1, Grade 40 - Oil, solvent and fuel resistant - Weather resistant - Temperature -70°F to 400°F
FK-50	50	900	Gum / Peroxide	- Mil-R-25988 B Type 2, Class 1, Grade 50 - Oil, solvent and fuel resistant - Weather resistant - Temperature -70°F to 400°F
FK-60	60	1100	Gum / Peroxide	- Mil-R-25988 B Type 2, Class 1, Grade 60 - Oil, solvent and fuel resistant - Weather resistant - Temperature -70°F to 400°F
FK-70	70	950	Gum / Peroxide	- Mil-R-25988 B Type 2, Class 1, Grade 70 - Oil, solvent and fuel resistant - Weather resistant - Temperature -70°F to 400°F

Additional Information for Molded Gaskets and Sheets
RMA Molding Tolerances
Custom Colors for Silicone Liquid Injection Molding (LIM)
Molded Silicone Gaskets with Adhesive
Molded LSR with Fluoropolymer Coating
Molded FDA and Heat Seal Silicones

Contact Stockwell Elastomerics, Inc.


DATASHEETS

	Overview

	ESD, EMI, and Electrically Conductive Materials

	PORON®

	Thermal

	Silicone Sponges & Foams

	Solid Silicone

	Gasket Tape / Strip Gasket

	Closed Cell Rubber

	Fluorosilicone

	Molding

	Adhesives