home > products > Silicone Gaskets, Solid, Sponge, Foam, Molded Silicone Gaskets

Silicone Gaskets

Stockwell Elastomerics manufactures custom silicone gaskets, including solid silicone gaskets, silicone sponge gaskets, silicone foam gaskets, and injection molded silicone gaskets for many industries and applications.

Solid Silicone Gaskets

Solid silicone gaskets are generally die cut or waterjet cut from sheet goods. The hardness of solid silicone gaskets are called out in durometer on the Shore A scale ranging from 10 - 70 durometer. Solid gaskets are very firm in comparison to silicone foam or silicone sponge gaskets. Solid gaskets in the mid to higher durometers require good closure force and are more commonly used on metal closures (as compared to plastic). Stockwell can also injection mold or compression mold solid silicone gaskets. Molded seals with round cross-sections are often required for improved sealing integrity for water submersion requirements.

Sponge Silicone Gaskets

Sponge silicone gaskets are soft in comparison to solid silicone gaskets, though there is some cross-over at the low durometer solids and the firm grades of silicone sponge. The closed cell structure make silicone sponge an excellent product for environmental seals such as NEMA 4 and IP-65. Silicone by nature performs well under UV and is mechanically stable over a broad temperature range, often considered for high temperature gaskets and low temperature gaskets. The firmness of silicone sponges is commonly defined by compression force deflection in a psi (pounds per square inch) range compressed 25%. 2 to 5 psi compression force deflection is considered soft, whereas 14 to 20 psi is considered firm.

Silicone Foam Gaskets

Foam silicone gaskets are closely related to silicone sponge gaskets, the difference is how the products are made. Silicone foam products can range in cell structure from very open cell to mostly closed cell. The open celled silicone products can be used for dust seals or shock/vibration gaskets. The mostly closed celled silicone foam gaskets can be used for environmental seals. Gaskets made from Silicone foam would be considered to be high temperature gaskets and low temperature gaskets due to silicone's mechanical stability in temperature extremes. Silicone is also very stable by nature under UV. The Bisco™ silicone foams are certified by Underwriter Laboratories to have a flame rating of UL94-V0 making them an excellent choice for electrical enclosure gaskets.

Injection Molded Silicone Gaskets

Molded seals with round cross-sections are often required for improved sealing integrity for water submersion requirements. Liquid silicone rubber (LSR) enables very small cross sections, down to .030" to be molded in durometers from 10 to 70 Shore A. With injection molded liquid silicone rubber, parting line flash can be reduced to ensure sealing integrity. Contact us about our new helpful kit of O-ring cross sections to assist in designing enclosure seals.

Contact Stockwell Elastomerics, Inc.

Contact Us for further assistance with silicone gaskets and foam gaskets.

PRODUCTS
	Overview
	Silicone Gaskets
	Silicone Pads
	Thermal Gap Filler Pads
	Custom Conductive Gaskets & Pads
	EMI Gaskets
	High Temp Gaskets
	Enclosure Gaskets
	Custom Gaskets
	Vibration Dampening Pads
	Gasket Tape
	Elastomer Gaskets
	DP-1001