Stockwell Elastometrics logo
Stockwell Elastometrics Blog  Stockwell Elastometrics on LinkedIn  Stockwell Elastometrics on Twitter  Stockwell Elastometrics on Facebook  Stockwell Elastometrics on YouTube  Stockwell Elastometrics on Google+  
Home > Materials > Solid Silicone Sheet, Silicone Rubber Sheet

Solid Silicone Sheet Products

Solid Silicone

Solid silicone sheet / silicone rubber sheet materials are inventoried by Stockwell Elastomerics from .015" (0.38mm) to .500" (12.7mm) thick and 10 to 70 durometer (hardness) Shore A. Stockwell Elastomerics inventories and fabricates the full line of NORSEAL® (formerly COHRlastic®) silicone rubber sheet materials and many silicones provided by the Rogers BISCO® materials unit.

Product availability ranges from general purpose and military specification grades, high flex / high tear strength grades, new liquid silicone rubber sheet (LSR) products that have exceptional elongation properties, silicones with UL 94 flame ratings, electrical conductivity and thermal conductivity among other properties.

Visit the Solid Silicone Data Sheets page for detailed technical information on each solid silicone product.

Silicone Materials Selection Guide



Solid Silicone Sheet

Silicone Sheet in Continuous Rolls

Stockwell Elastomerics maintains a full inventory of solid silicones that have been calendered and rotocured in 36" wide continuous rolls, in thicknesses from .015" to .125" thick. Silicone sheet that has been calendered and cured in an autoclave or rotocured will usually have tighter thickness tolerances than molded sheets.

Most manufactured silicone rubber sheet is cured from gum based silicone - specifically methyl vinyl silicones, which meet a number of military, AMS and industrial specifications. These common silicones have a durometer range of 25 to 70 shore A, and the temperature range for these silicones is generally -100ºF to 500ºF.

Solid Silicone Sheet, close-up view

The methyl-based gum silicones can be compounded to have high elongation, flex, tensile and tear properties for mechanically demanding properties. Stockwell Elastomerics inventories high strength silicone sheet in thicknesses and durometers ranging from .015" to .125" thick and in 30, 50 and 70 Shore A.

Relatively new liquid silicone rubber sheet (LSR) is cast and cured into thin gauge continuous rolls from .010" to .032" thick in 36" widths. The most commonly available LSR sheet materials are provided in 10 to 40 durometer Shore A. LSR compounds have a platinum cure system, which decreases out-gassing and makes these silicone products more friendly to electronic, medical and optical applications.

Specialty Silicones in 12" x 12" Molded Sheets

Stockwell Elastomerics has in-house compression molding capabilities, which allows us to provide 12" x 12" molded gum based silicone sheets in virtually any thickness from .020" through .500" thick. Fast-turn and short run molding of custom silicone sheets in many non-standard compounds, durometers and specifications are available for prototyping and initial production requirements. Examples of special compounds include phenyl based silicones for extreme low temperature (-130ºF), flame retardant, semi-conductive and electrically conductive silicones, thermally conductive silicones and others.

Specifications Met by Silicone Rubber

The most frequent specifications requested are ZZ-R-765, ZZ-R-765b or ZZ-R-765e. The ZZ-R-765 military specification is now listed within A-A-59588. The same convention applies; ZZ-R-765 Class 1 calls out extreme low temperature phenyl base silicone, ZZ-R-765 Class 2 calls out general purpose, low compression set methyl-vinyl silicone and ZZ-R-765 Class 3 calls out high tear strength grades of silicone.

Silicone Sheet in 36" x 36" Molded Sheets

Stockwell Elastomerics inventories 36" x 36" gum based silicone sheet in .188" (3.18mm) through .500" (12.7mm). Also in inventory is 50 durometer silicone in every standard gauge (.188", .250", .375" and .500") and 30, 40 and 70 durometer silicone in many gauges from .188" through .500".

Stockwell Elastomerics has developed a 12" x 12" injection molding process to support the needs of customers requiring liquid silicone rubber (LSR) in sheets, .032", .062", .125" and .188" thick. The present durometer range is 5 to 70 durometer shore A. Special colors and pressure sensitive adhesive backings are often provided on sheets molded with this unique capability - these are often water jet cut into made-to-order gaskets from our customer's electronic dxf files.

Solid silicone rubber sheet material is readily fabricated into gaskets and cushioning pads. Stockwell Elastomerics' fabrication capabilities include die cutting, adhesive lamination, slitting to width and water jet cutting of prototypes and production components.

Silicon Rubber/Silicon Sheet or Silicone Rubber/Silicone Sheet?

Although silicon rubber or silicon is called out frequently called out on prints, silicone is the widely accepted term used in the rubber industry.

Contact Stockwell Elastomerics for Solid Silicone Sheet

Contact Us for further assistance with solid silicone rubber sheet products.

BISCO® is a registered trademark of Rogers Corporation.
NORSEAL® and COHRlastic® are registered trademarks of Saint-Gobain.